GreenWorks G20 Manual Del Operador página 6

4.1 CONNECT THE WATER SUPPLY
TO THE MACHINE
For easy operation, please use a self-coiling garden
hose (not provided).
WARNING
When you operate the self-coiling hose, make sure
that the hose has no blockage.
WARNING
• The water supply must come from the water main
• Do not use hot water
• Do not use water from ponds or lakes
WARNING
Do the local regulations when you connect the garden
hose to the water supply. Direct connection through
a receiver tank or backflow preventer is usually
permitted.
CAUTION
Inspect the filter in the water inlet connector before
you connect the garden hose
• If the filter is damaged, do not use the machine
until the filter is replaced.
• If the filter is dirty, clean the filter.
Figure 7.
1. Uncoil the garden hose.
2. Let the water flow through the garden hose for 30
seconds.
3. Turn the water supply off.
4. Install and tighten the end of the garden hose to the
water inlet connector.
CAUTION
There must be a minimum of 3 m of free hose
between the water inlet and the water supply.
4.2 USE THE GUN
Figure 2.
WARNING
For safe control, keep your hands on the gun at all
times.
• Pull and hold the gun trigger to start the machine.
• Release the gun trigger to stop water flow through
the nozzle.
4.2.1 UNLOCK THE GUN TRIGGER
• Push backward the trigger safety button.
English
4.2.2 LOCK THE GUN TRIGGER
• Push forward the trigger safety button.
4.3 INSTALL THE NOZZLE
Figure 6.
Before you change the nozzle:
1. Pull the gun trigger to release water pressure.
2. Lock the trigger safety button on the gun.
3. Stop the mahcine.
Do not point the spray wand at your face or others'.
1. Push and hold the lock button on the spray wand.
2. Align the pin on the nozzle with the hole on the
spray wand.
3. Install the nozzle onto the spray wand.
4. Rotate the nozzle to adjust the spray shape.
4.4 INSTALL THE DETERGENT TANK
Figure 8.
Do not use household detergents, acids, alkalines,
bleaches, solvents, flammable material, or industrial
grade solutions, which can do damage to the pump.
Do the instructions on the solution bottle to prepare
detergent.
If it is necessary, use a funnel to prevent the spill of
detergent. Clean and dry the spilled detergent when
you fill it.
1. Put the detergent into the detergent tank.
2. Push and hold the lock button on the spray wand.
3. Install the detergent tank onto the spray wand.
Do not let detergent dry on the surface to prevent
streaks.
4.5 START THE MACHINE
Figure 9.
5
WARNING
WARNING
WARNING
WARNING
NOTE
NOTE
EN