Rohde TE Serie Manual De Instrucciones página 43

Step Action required
4 To do this, loosen the supporting screw on the back.
Now you can lift the floor and place it horizontally on an
5
even surface. Do not place the floor vertically on its side!
Ecotop
Step Action required
If necessary, you can seperate the kiln stand from the
1
kiln.
Check the tensioning belts of the stainless steel kiln
2
casing beforehand and tighten them slightly if necessary.
3 To do this, loosen the supporting screws on the front.
4 To do this, loosen the supporting screws on the back.
You can now lift off the kiln body and store it upright on
5
a flat surface.
41 / 161 - EN -
Illustration
Illustration