Publicidad
Idiomas disponibles
Idiomas disponibles
10. Derailleur level installation:
10.1 First remove the pre-installed handle grip cover on the handlebar.
10.2 Take out the derailleur level from the small box, first put the speed control
handle in form the right side of the handlebar, then put the sheath, then put
the short handle cover, and knock the handle in place with a rubber hammer.
10.3 Put the long handle cover on the left handlebar, and then knock the
handle in place with a rubber hammer.
10.4 First connect the power cord connector of the derailleur to the main
connector, then move the derailleur to a suitable position, and lock it with an
M3 hexagon wrench.
11.Tire inflation instruction:
11.1 After the bicycle is assembled, please check whether the air pressure of
the front and rear tires is within the normal value.
11.2 When refilling tires, you must refer to the inflation reference range on the
side of the tire for refilling, generally between 35PSI---65PSI
(280Kpa--450Kpa).
8
Publicidad
