Publicidad
POWER-OFF:
Press and hold the on / off button until the robot indicators turn off.
VIRTUAL WALL:
To use the Virtual Wall, place the included magnetic tape on the area you want to
outline. This will prevent the Robot Vacuum from leaving the desired surface.
RETURN TO THE CLEANING BASE:
1. Press the Return to Clean Base button.
2. Wait for your Robot Vacuum to return to its base.
3. Once on the base, press the Return to Clean Base button again to begin the
self-cleaning process of your Robot Vacuum.
Note: Make sure the clean base has the dust bag attached correctly.
CLEANING MODES
Note: The following instructions are available with your remote control or directly from the APP Tuya Smart.
AUTOMATIC CLEANING
1. At the beginning of a cleaning cycle, the Robot Vacuum Cleaner will map the
area and clean it efficiently.
2. At various times during the cleaning cycle, the Robot Vacuum Cleaner will
collide with the edges of the room, as well as the legs of chairs and other
furniture.
3. The Robot Vacuum Cleaner will continue this process until it has cleaned
the entire level of his house.
4. If the battery gets low before the end of a cleaning cycle, the Robot Vacuum
Cleaner will return to the charging base to recharge.
SPOT CLEANING
The Robot Vacuum Cleaner intensively cleans a localized area.
1. Place the Robot Vacuum Cleaner on the located debris and press "Spot" on the
remote control.
2. The Robot Vacuum Cleaner will spiral outward about 3 feet (1 meter) in diameter
and then spiraling inward to where it started.
EDGE CLEANING
Ensure that it has been cleaned along the walls and around the legs of the furniture.
If you prefer faster edge cleaning, press the button on the remote control.
RANDOM CLEANING
1. Press the button shown in the picture to start Random Cleaning.
2. This function will clean all available places in the room.
3. At various times during the cleaning cycle, the Robot Vacuum will collide with
the edges of the room, like chairs and other furniture.
4. If the battery dies during the cleaning process, the Robot Vacuum will return
to its charging base and then finish the cleaning cycle.
5
4. Seleccione la opción "Repeat" o "Repetir" para configurar los días que quiere se repita el ciclo
de limpieza a programar.
5. Seleccione "Clean Time" o "Hora de limpieza" para configurar la hora en la que quiere que inicie
el ciclo de limpieza a programar.
6. Seleccione "Mode Setting" o "Configuración de modo" para que configure la velocidad de
aspirado y cantidad de flujo de agua que le gustaría tener durante su ciclo de limpieza.
Si solo quiere que su Aspiradora Robot haga la función de Aspirar, en la sección de "Mode Setting"
o "Configuración de modo" debe seleccionar "Close" o "Cerrar" para la opción de "Water Level" o
"Nivel de agua".
Si solo quiere que su Aspiradora Robot haga la función de Trapear, en la sección de "Mode Setting"
o "Configuración de modo" debe seleccionar "Close" o "Cerrar".
Nota: Su Aspiradora Robot puede Aspirar y Trapear al mismo tiempo, sin embargo, NO puede aspirar líquidos.
Es posible programar 30 ciclos de limpieza hasta por 7 días.
CONTROL REMOTO DESDE LA APP
1. Ir a la opción de "Configuración" o "More"
2. Seleccione la opción "Remote Control" o "Control Remoto"
Podrá ver el Panel de Control de su Aspiradora Robot.
(Avanzar, retroceder, girar el robot manualmente, inicio/pausa)
HISTORIAL DE LIMPIEZA
1. Ir a la opción de "Configuración" o "More"
2. Seleccione la opción "Cleaning Record" o "Historial de limpieza".
3. Podrá ver el historial de las veces que su Aspiradora Robot ha limpiado, el
área de limpieza, la hora y el tiempo de limpieza.
MANTENIMIENTO Y VIDA DE LAS REFACCIONES
Porcentaje de vida restante aproximado en componentes
1. Ir a la opción de "Configuración Avanzada" o "More"
2. Seleccionar la opción "Consumables maintenance" o "Mantenimiento de
componentes"
Nota: La Aspiradora Robot incluye 2 cepillos laterales y 1 filtro plisado HEPA como refacción
LOCALIZAR ASPIRADORA ROBOT
1. Ir a la opción de "Configuración" o "More"
2. Seleccione la opción "Find the Robot" o "Encontrar Robot" para localizar su
Aspiradora Robot mediante un beep.
22
Publicidad
