Operational Introduction Of The Control Panel; Mode Button - INVENTOR COOL FCOOL-8BS Manual De Usuario

Operational introduction of the Control Panel

3

MODE button

By pressing the MODE button repeatably the functions COOL-DRY-FAN appear:
COOL ➞ DRY ➞ FAN
COOL: Under COOL mode, the cooling indicator is lit. The set temperature is displayed on the digital
panel. The temperature range is 16°C ~ 30°C.
DRY: Under DRY mode, the drying indicator is lit, and in will not be displayed on the digital control
panel.
FAN: Under FAN mode, the air conditioners fan is in operation only. The fan indicator will be lit.
4
Water full indicator
When the WATER TANK FULL indicator is blinking, the water tank is full and should be drained.
Note:
When the water in the chassis is full, the unit will stop its operation alerting with 8 short
consecutive beeps, the WATER FULL indicator will blink and the digital panel will display "H8".
5