Handicare SIMPLICITY+ Manual De Instalación página 26

Appendix 1
Diagnostic codes
Code:
Okay
Meaning:
Charging.
Telephone fault finding action:
If no other code is displayed and lift does not drive – are the arms
fully down? Ask client if 8 or 9 show in the display when the toggle
switch is activated – if no send an engineer.
On site fault finding action:
Send engineer to check toggle and arm circuit.
1
Code:
1
Meaning:
Requires charge.
Telephone fault finding action:
Ask client to drive lift to charge contacts – if 'Okay' code does
not show send engineer.
On site fault finding action:
Drive lift to charge contacts. Check charging circuit if 'Okay'
code not displayed.
3
Code:
3
Meaning:
Top stop – Right hand.
Bottom stop – Left hand.
Telephone fault finding action:
Ask client to tap trunnion guards in case they are stuck.
If this does not correct the fault – send engineer.
On site fault finding action:
Check end limit circuit and trunnion guards.
MINIVATOR SIMPLICITY + INSTALLATION MANUAL
26
Description:
Description:
Description:
End limits activated.
Code:
None
Meaning:
No display.
Telephone fault finding action:
Ask client to press toggle and see if display comes on.
Ask if main power switch on the lift is turned on.
If does not correct fault – send engineer.
On site fault finding action:
Check batteries. Check display board is working correctly.
Check comms circuit for short circuits.
0
Code:
0
Meaning:
Final limit activated.
Telephone fault finding action:
Ask client to ensure key switch is on and seat is fully swivelled to
drive position. If this does not correct the fault – send engineer.
On site fault finding action:
Test each item in turn to determine fault.
2
Code:
2
Meaning:
Off charge.
Telephone fault finding action:
Ask client to drive lift to charge contacts – if 'Okay' code does
not show send engineer.
On site fault finding action:
Drive lift to charge contacts. Check charging circuit if 'Okay'
code not displayed.
4
Code:
4
Meaning:
Top pressure – Right hand.
Bottom pressure – Left hand.
Telephone fault finding action:
Ask client to tap footplate edges. If this does not correct the fault
– send engineer.
On site fault finding action:
Check footplate leading edge.
Description:
Description:
Key switch, seat swivel, OSG,
overrun activated, short circuit.
Description:
Description:
Safety edge (up/down direction)
activated – footplate.