Handicare SIMPLICITY+ Manual De Instalación página 5

Figure 6
Figure 7
Figure 8
Track assembly
Figure 9
Figure 10
f Bring the top copper charge strip over the
connecting strip so that the connecting strip
is sandwiched between the copper and
plastic parts, as on the bottom section
(Figure 9).
g Make sure the top and bottom sections of
charge strip are as close as possible.
Note: Ensure that the track is connected with all
faces level so that no step is present in the joint.
Pay close attention to the busbar charging strip
– this connection MUST be flush (Figure 10).
MINIVATOR SIMPLICITY + INSTALLATION MANUAL
5