Handicare SIMPLICITY+ Manual De Instalación página 3

Figure 1
Figure 2
Track assembly
Track assembly
Before beginning the installation please
ensure that the track is the required length.
Refer to ppendix 4 for details.
Items required:
• Fit kit
Splice bars x 3
Track ends cap x 1
Red bag
8 x bolts
4 x grub screws
Final limit stops x 1
End stops x 1
Mounting feet x 3
• Top track section x 1
• Bottom track section x 1
1 Position the bottom section of the track (2m)
on the stairs with the splice holes at the top
(Figure 1). Regardless of the hand of the lift
the track should always be on the left hand
side of the rack when looking up the stairs.
2 Bolt in the splice bars to the bottom section of
track extrusion (Figure 2) using 2 grub screws
for the top splice bar and the 4 bolts in the
bottom splice bars (from the red fittings bag).
Figure 3
MINIVATOR SIMPLICITY + INSTALLATION MANUAL
Tools required:
• 2.5mm llen key
• 3mm llen key
• 6mm llen key
• 13mm Spanner
3