ZYMBO 10HP Manual De Instalación página 35

3.7 SLEEP MODE
3.8 AUTO MODE
Sequence of the operation
Press the ON/OFF button "①", switch on the air
conditioner, it will run by memory mode.
Press the MODE button "M", set up the mode to
cool" ",
conditioner will run in setting mode.
Press UP "∧" or DOWN "∨" button, to adjust
the setting temperature.
Press the SLEEP button "
display on LCD, sleep function is set up; press it
again, cancel the SLEEP function.
If the SLEEP function is launched, the fan speed is
steady in low speed.
Sequence of the operation
Press the ON/OFF button "①", switch on the air conditioner, it
will run by memory mode.
Press the MODE button "M", set up the mode to auto "
the unit will run in Auto mode.
According to the difference of room temp and setting temp,
automatically choose the running mode (cool,heat,fan). The
temp setting button UP "∧" and DOWN "∨" are disable.
When room temperature ≤ 20℃, run with heating mode.
When 20 ℃＜room temperature＜25 ℃, run with fan mode.
When room temperature ≥25℃,run with cooling mode.
Press the FAN SPEED
is low, is middle,
auto fan, the speed is chosen by the difference of room
temperature and setting temperature.
Press the ON/OFF button "①", switch off the air
conditioner. Next time when this button is pressed, the air
conditioner will operate in this mode by memory.
heat" ", auto "
" ,this icon will
button" ", set up the fan speed,
is high, flashing is auto. For
EN
", the air
",
14