Publicidad
Idiomas disponibles
Idiomas disponibles
4.3.Pairing your earbuds in mono mode
1. If the earbuds were previously paired to
your mobile device, unpair/forget them from
your mobile device.
2. Remove one earbud from the charging case.
The earbud starts blinking red and blue.
3. Place the mobile phone and earbud within
three feet of each other. Select the
KTE-100BK earbud from the list of newly
discovered devices in your phone.
Note: The KTE-100BK will appear twice in
the Bluetooth
devices list.
®
4. To pair the earbuds back together insert
them back into the case and remove them
together, this allows one to pair with the
other making them a single unit.
4.4 Using the wireless earbuds
1. Answering and ending a call
• When there is an incoming call, your phone
will ring along with a tone through your
earbuds.
• Touch the multifunction button once on any
earbud to pick it up. You may also press the
answer button on your mobile phone to
receive the incoming communication in your
earbuds.
• To end a call, press the multifunction button
once again on any earbud. Likewise, you may
also finish the call directly using the end key
on your smartphone.
• To reject an incoming call, press the
multifunction button for 2 seconds.
2. Music playback and voice commands using
your earbuds
• Press the multifunction button once on either
one of the earbuds to play and stop audio
playback.
• Triple tap the left button to go to the
previous track.
• Triple tap the right button to go to the
next track.
• Press the left button twice to lower the volume.
• Press the right button twice to increase the
volume.
• When audio is being played or paused, press,
and hold the multifunction button for 3
seconds to enable the voice assistant for Siri
or Google.
Publicidad
