Publicidad
Idiomas disponibles
Idiomas disponibles
3.2. Turning your earbuds on or o
1. The earbuds automatically turn on when
removed from the charging case.
2. The right earbud's blue LED indicator turns
off when both earbuds synchronize.
3. The earbuds automatically turn off when
placed in the charging case.
4. Advanced operation
4.1. TWS pairing
Simply take the earbuds out of the charging
case. They will sync with each other
automatically, and then enter into pairing
mode.
Note: Before installing this product, please
make sure your device is Bluetooth
compatible.
4.2. Pairing the earbuds with your mobile
device
1. Turn both earbuds on by removing them
from the charging case. Both earbuds
synchronize automatically. One Earbud will
start blinking red and blue.
®
2. Set your Bluetooth
®
"discover" the wireless earbuds.
3. Place both earbuds and your phone not
more than three feet from each other.
4. On your mobile phone, tap the newly
discovered audio device KTE-100BK being
displayed in the Bluetooth
5. When the mobile device asks if you want to
pair with it, click Yes or OK to accept.
6. The blue LED indicator in both earbuds turns
off when they are successfully paired to the
phone.
7. If after 60 seconds the pairing process fails,
please repeat steps 1 through 5 as described
above.
8. The earbuds turn off automatically after 5
minutes if they are not paired to a device.
9. You only need to pair the earbuds with your
mobile phone once, as they reconnect with
memorized devices automatically.
mobile device to
list.
®
Publicidad
