Publicidad
Idiomas disponibles
Idiomas disponibles
a) Have your power tool serviced by a qualified repair person using
only identical replacement parts. This will ensure that the safety of the
power tool is maintained.
Safety Warnings for Heat Gun
a) This hot air gun is not intended for use by children and
persons with physical, sensory or mental limitations or a
lack of experience or knowledge.
b) This hot air gun can be used by children aged 8 or older and
by persons who have physical, sensory or mental
limitations or a lack of experience or knowledge if a person
responsible for their safety supervises them or has
instructed them in the safe operation of the hot air gun and
they understand the associated dangers. Otherwise, there is
a danger of operating errors and injuries.
c) Supervise children. This will ensure that children do not play
with the hot air gun.
Children must not be allowed to clean and perform
d)
maintenance on the hot air gun without supervision.
e) Be careful when working with the power tool. The power tool produces
intense heat which can lead to increased danger of fire and explosion.
f)
Exercise special care when working close to inflammable materials.
The hot air jet or the hot nozzle can ignite dust or gases.
g) Do not operate or work with the power tool in areas where there is
danger of explosion.
h) Never direct the hot air jet at the same position for longer periods.
Easily inflammable gases can develop e.g., when working plastic, paint,
varnish or similar materials.
Be aware that heat can be conducted to hidden covered materials
i)
and can ignite them.
j)
After using, place the power tool down in a secure manner and
allow it to cool down completely before packing it away. The hot
nozzle can cause damage.
k) Do not leave the switched-on power tool unattended.
Store idle power tools out of the reach of children. Do not allow
l)
persons unfamiliar with the power tool or these instructions to
operate the power tool. Power tools are dangerous in the hands of
untrained users.
m) Do not expose the power tool to rain or wet conditions. Water
entering a power tool will increase the risk of electric shock.
n) Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled cords increase the risk of
electric shock.
Publicidad
