Publicidad
Idiomas disponibles
Idiomas disponibles
seconds depending on the material. Apply the solder. The solder must melt from
the workpiece temperature. After the soldered location has cooled, remove the
flux.
Maintenance and Cleaning
Before any work on the machine itself, pull the mains plug.
For safe and proper working, always keep the machine and ventilation
slots clean.
If the replacement of the supply cord is necessary, this has to be done by an
authorized service agent in order to avoid a safety hazard.
ENVIRONMENTAL PROTECTION
Do not dispose of in general household waste. Instead dispose of in
an environmental way, contact your local recycling centre of council
for advice. Please take the care of the environment very seriously.
Publicidad
