Zipro Drift Manual De Uso página 11

EN
and should not be thrown away with household waste. Dispose of them
in an appropriate battery recycling centre.
ENVIRONMENT
The device is delivered in a package to protect it against any possible
transport damage. The packaging is made from non-processed
material and can be recycled. Throw the materials to appropriate
colour containers for selective waste collection.
Protect the environment and do not throw used batteries into
household wastes. Return them to the point of sale or a special
recycling centre.
Used electrical equipment (including the computer and power supply)
are recyclable. Do not throw them out with household waste as they
may contain substances dangerous to the health and environment. You
can actively contribute to sustainable use of natural resources and the
protection of the natural environment by handing the used device to
a recycling centre for used electrical devices.
ASSEMBLY
The device must be assembled carefully by an adult. In case of doubt,
ask a more experienced person for help.
ASSEMBLY DIAGRAM (→ See page 2)
ATTENTION! Do not use parts other than those provided by the manufacturer.
PARTS LIST
No. Description
1 Main frame
2 Front base
3 Rear base
4 Handlebar post
5 Steering wheel
6 Saddle post
7 Saddle
8 Computer
9L/R Left/right pedal
10 Crank
11 Front base cap
12 Rear base levelling pad
13 Bolt M10x57
14 Curved washer D10xφ25x1.5xr28
15 Nut M10
16 Resistance adjustment cable
17 Computer cables
18 Connecting cable
ASSEMBLY MANUAL
CAUTION! Follow the steps below during the assembly and use tools supplied with the product.
Prepare sufficient space for the assembly operation.
It is advisable to assemble the product with another person because of the weight of some elements.
11
• Prior to the assembly, make sure the set contains all
the listed elements and whether none of the parts was damaged
during transport. If any parts are missing or you have any other
reservations, contact the seller.
• Have a look at the drawings and explanations and follow the
assembly manual when assembling the device.
• Be careful during the assembly. There is a risk of injury when
using the tools and parts.
• Remember to keep your surroundings safe. Do not let tools and
parts lie around in chaos. Remember that plastic foil and bags
pose o suffocation risk to small children.
• Assembly parts necessary for a specific step in
the assembly manual are shown in pictures and included in
instructions. Use the elements indicated in the assembly
manual.
• Do not tighten parts completely during the first stages
of the assembly. Tighten connections after all parts are placed
and fitted properly.
•
The manufacturer may have assembled some parts.
Quantity No. Description
1 19 Bolt M8x15
1 20 Resistance adjustment knob
1 21 Resistance adjustment knob cover
1 22 Flat washer D5
1 23 Bolt M5x40
1 24 Heart rate measurement cables
1 25 Spring washer D8
1 26 Bolt M8x30
1/1 27 Handlebar cover
1 28 Foam grip
2 29 Handlebar cap
2 30 Phillips screw
4 31 Saddle height knob
4 32 Saddle post sleeve
4 33 Flat washer D8
1 34 Locknut M8
1 35 Curved washer D8xφ25x1.5xr25
1 36 Towel holder
1. Install the front and rear base
Fix the front (2) and rear base (3) to the main frame (1) using bolts (13), curved
washers (14), and nuts (15).
ATTENTION! Remove any plastic or cardboard safety inserts before assembly.
CAUTION! The front base has transport rollers.
Quantity
1
1
1
1
1
2
2
2
1
2
2
4
1
1
5
3
4
1