Descargar Imprimir esta página

ProMed 5040-SX2 Instrucciones De Empleo página 34

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 77
o
PeratInG the UnIt
O. Foot switch / pedal (optional)
• A foot switch (ON / OFF) or an infinitely variable pedal are
available as accessories. They are optionally connected to
the connection socket on the rear side of the device (Q). The
connection of a pedal is shown on the display by the icon
• As long as a foot switch or a rocker pedal is connected, the
button (B)
has no function.
• If the rotation of the handpiece is deactivated by a micro-switch
(V) and any type of pedal is connected, a beep tone will be
DE
heard when the foot pedal is pressed and a blue LED on button
(B)
blinks in faster intervals, (2x short, so-called „double-
EN
pulse blinking).
• The rotating direction can only be changed (clockwise/
counterclockwise) with the button (C)
FR
pedal or foot switch is not pressed.
IT
Foot switch
• With the foot switch (ON/OFF) the device can be activated
i.e. the adjusted values of the speed control and spray can be
ES
triggered by pressing the foot button.
• The removal of the foot from the button leads to stop the speed of
PT
the handpiece and spray.
PL
Rocker Pedal
• With the rocker pedal the speed can be controlled variably and
vey delicately.
• The setting of the button (D)
.
„preselection" at maximum points.
• The standard possibility by foot is limited according to the shown
speed on the display (F).
• In order to direct the total speed range with the foot control,
adjust the speed with the button (D)
• By removing the foot from the pedal, the motor and the spray
flow stops.
when the connected
Kaitstud / Secured by https://mereneid.eu/
P. Inserting the instrument / changing the instrument
• Always switch off the motor to insert or change a milling
cutter.
• The convenient quickrelease mechanism enables a change of
instruments without rotating the grip sleeve (centrifugal stress).
Cutters, polishers, etc. have to be inserted until the bottom of the
chuck.
• Similarly, with an intended instrument change, the used cutters
are easily pulled out from the adapter (shut down the engine
before!)
(Equivalent 40 000 rpm).
Note:
Only Promed foot pedals can be used.
and (E)
serves a
at the maximum level

Publicidad

loading