Cleaning And Maintenance - Medisana BW 300 CONNECT Instrucciones De Manejo

Symbol Cause
E20 Pulse cannot be
detected
Measurement failed
E21
EExx Calibration error
Movement perceived
Please contact the service centre if you can't solve the problem. Do not
disassemble the unit by yourself.

6.2 Cleaning and maintenance

•
Never use strong detergents or hard brushes.
•
Clean the unit with a soft cloth, moistened with mild soapy water. Do
not let water enter the unit. After cleaning, only use the unit when it is
completely dry.
•
Do not expose the unit to direct sunlight, and protect it from dust and
moisture.
•
Only inflate the cuff when it is in position around the wrist.
•
Servicing and calibration
The unit has been calibrated by the manufacturer for a period of two
years' use. In the case of commercial use, the unit must be serviced
and recalibrated at least once every two years. This calibration will be
charged for and can be carried out by an appropriate authority or an
authorised service centre - in accordance with the regulations for users
of medical equipment.
6.3 Disposal
This product must not be disposed of together with domestic
waste. All users are obliged to hand in all electrical or electronic
devices, regardless of whether or not they contain toxic subs-
tances, at a municipal or commercial collection point so that they
can be disposed of in an environmentally acceptable manner.
Do not dispose of old batteries with your household waste, but at a
battery collection station at a recycling site or in a shop. Consult your
local authority or your supplier for information about disposal.
6.4 Guidelines / Standards
This blood pressure monitor meets the requirements of the EU standard
for noninvasive blood pressure monitors. It is certified in accordance with
EC Guidelines and carries the CE symbol (conformity symbol) "CE 0297".
The blood pressure monitor corresponds to European standards EN
1060-1 and EN 1060-3. The specifications of EU Guideline "93/42/EEC of
6 Miscellaneous
Correction
Wrap the cuff properly.
Remeasure in correct way.
Rest 30 minutes and remeasure
in correct way.
Wrap the cuff properly.
Remeasure in correct way.
Do not speak or move during the
measurement.
GB
i
i
i
i
i
i
27