Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning the HD-7500
•
When you clean this product, do not use thinner, benzene or toilet bowl
cleaner, as it may cause discoloration or damage.
•
Disconnect the power cord and use a wet cloth when you clean this product.
Cleaning the Strainer
*Close shut-off valve
This product will not operate properly if the strainer is clogged.
Please clean the strainer regularly.
1.
Unplug the power cord. Close the water shut-off valve.
2.
Unscrew the bidet hose from the bidet seat.
3.
Clean the strainer with a small brush.
4.
Re-connect the bidet hose. Open the water shut-off valve.
Plug in the power cord.
18
Problem
Check The Following
•
Check if water supply is cut off.
Water does
•
Check if the strainer is clogged.
not spray
•
Ensure the seat sensor is activated.
•
Check if power cord is plugged in.
The unit is not
•
Check the LED light on side control panel.
operating
•
Ensure the seat sensor is activated.
•
Verify all connections are secure.
Water is leaking
•
Contact customer support.
•
Check the pressure if set to low.
The water
•
Check for any kinked hoses.
pressure is weak
•
Check if the strainer is clogged.
The heated seat
is not warm
•
Check if the seat temperature is set to level 1.
enough
The water
is not warm
•
Check if the water temperature is set to level 1.
enough
The nozzle
•
Ensure the seat sensor is activated.
is stuck
The product
•
Tighten the mounting bolts firmly.
is unstable
The dryer is
•
Ensure the seat sensor is activated.
not working
The dryer
•
The dryer may release a slight odor for the first few uses.
has a smell
19
Publicidad
