Specifications
Power Rating
Water Supply Method
Water Supply
Water Pressure Range
Power Cord
Posterior Wash
Feminine Wash
Wash
Adjustable
Device
Water Pressure
Warm Water Temp
Temperature
Heater
Heated
Seat
Safety Devices
Temperature
Dryer
Heater
Safety Devices
Dryer
Eco Mode
Night Light
Inlet Water Temperature
Ambient Temperature
Elongated
Dimensions
Round
Weight
20
HD-7500
120Vac, 60Hz, 1400W
Direct connection to waterworks
0.07 ~ 0.74 MPa(0.7 ~ 7.5 kgf/cm2)
4 feet
Max. 650 cc ± 100 cc
Max. 650 cc ± 100 cc
5 Levels
Room Temp - Low, Normal, High
Room Temp - Low, Normal, High
1200 W
Overheating preventing fuse, Seat
heat temperature sensor
Room Temperature, ~131°F level 1-5
250 W
Temperature fuse
•
•
•
41°F ~ 95°F ( 3°C~ 35°C )
(Recommended temp. - 50°F ~ 95°F)
41°F ~ 104°F ( 3°C~ 40°C )
(Recommended temp. - 50°F ~ 95°F)
W: 18.11 in / L : 20.47 in / H : 5.31 in
W:15.43 in / L: 18.9 in / H: 5.71 in
7.9 lbs (Packaged: 11.4 lbs)
1 YEAR FULL COVERAGE WARRANTY
Bio Bidet Innovation LLC warrants its product to be free from manufacturing
defects under normal use and service for a period of one (1) year from
original date of purchase.
This warranty is extended only to the ORIGINAL PURCHASER.
•
Bio Bidet Innovation LLC's obligations under this warranty are limited to
repair or replacement, at Bio Bidet Innovation LLC's option, of products
or parts found to be defective, provided that such products were properly
installed and used in accordance with instructions.
•
Bio Bidet Innovation LLC reserves the right to make such inspections
as may be necessary in order to determine the cause of the defect.
•
Bio Bidet Innovation LLC will not charge for labor or parts in connection
with warranty repairs done at Bio Bidet Innovation LLC.
•
Bio Bidet Innovation LLC is not responsible for the cost of removal, return,
initial install, and/or re-installation of products.
This warranty does not apply to the following items:
•
Damage or loss sustained in a natural calamity such as fire,
earthquake, flood, thunder electrical storm, etc.
•
Damage or loss resulting from any unreasonable use,
misuse, abuse, negligence, or improper maintenance of the product.
•
Damage or loss resulting from removal, improper repair,
or modification of the product.
•
Damage or loss resulting from sediments or foreign matter
contained in a water system.
•
Damage or loss resulting from improper installation or from
installation of a unit in a harsh and/or hazardous environment.
21