Descargar Imprimir esta página

BEMIS HD-7500 Manual Del Usuario página 3

Publicidad

Idiomas disponibles

Idiomas disponibles

PLEASE OBSERVE THE FOLLOWING PRECAUTIONS
AND INSTRUCTIONS BEFORE INSTALLATION AND USE.
This product must be connected to a grounded 120V GFCI (Ground Fault
Circuit Interrupt) outlet. Do not connect the power cord if it is damaged or
broken. Do not plug the product into a loose electric outlet.
It is recommended to operate this product on a separate circuit.
Sharing a circuit could cause the breaker to trip or lights to flicker.
If it is necessary to use an extension cord, use only a three-prong
extension cord plugged into a proper GFCI outlet. The marked rating
of the extension cord should be equal to or greater than the electrical
rating of the unit (10 amp). Consult a qualified electrician or service
person if you are not sure whether the unit is properly grounded.
Do not open this product for repair without authorization from the
manufacturer. Only qualified service personnel should service this
product. Do not use accessories not recommended by the manufacturer.
Connect this product to a cold water supply line.
Close supervision is necessary when this product is used by children,
eldely, or adults with sensitive skin. A low temperature burn may occur
when the skin has been in contact with an object at relatively low
temperature for an extended period of time.
If using any chemical toilet bowl cleaner, be sure to wipe up any spills that
splash onto the bidet. Do not use benzene or any acid chemical detergent,
as they can cause discoloration. Only neutral detergents are permitted.
Do not plug in the power cord before connecting the water supply hose.
Install in an area with adequate ventilation to avoid high levels of
humidity which can damage the electronic components.
Do not touch the power cord with wet hands or reach for a product
that has fallen into water. Unplug immediately.
Unplug the bidet seat when cleaning or detaching from the toilet bowl.
Do not plug in until plumbing work has been completed.
Keep the power cord away from heated surfaces to prevent a fire hazard.
Keep any flammable materials away from this product at all times.
4
5

Publicidad

loading