Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning
The tiller must be thoroughly cleaned after each use.
Careful handling protects the equipment and extends its
service life.
Before cleaning, let the machine cool down completely.
Storage
Never store the equipment with petrol in the tank.
Depending on the region and storage conditions, petrol can
deteriorate and oxidize, causing damages in the carburettor
and fuel system, difficult starts and clogging caused by
particle accumulation.
If you have stored the tiller with petrol in the tank, to avoid
difficult
starts,
comply
recommendations:
Less than 1 month:
▪ Follow the usual procedure.
1 month to 1 year:
▪ Empty all petrol form the tank;
▪ Run the engine until it stops due to lack of fuel;
▪ Clean the fuel tap.
Over 1 year:
▪ Empty all petrol form the tank;
▪ Run the engine until it stops due to lack of fuel;
▪ Clean the fuel tap;
▪ Change the oil;
▪ Remove the spark plug and put engine oil (5-10 cl) on
the cylinder;
▪ Pull the recoil starter to distribute the oil in the cylinder
and reinstall the spark plug;
▪ Pull the recoil starter slowly while feeling resistance;
▪ Pull the starter handle slowly while feeling resistance.
The piston is rising, and the intake and exhaust valves
are closed. Leaving the engine in this position will help
to protect from internal corrosion.
with
the
following
The packaging is made up of recyclable materials,
which you can dispose on local recycling points.
Never dispose of combustion equipment in your
household waste.
Waste such as used oil, fuel, lubricant, filters and wearing
parts can harm humans, animals and the environment and
as such must be properly disposed of.
Make sure that the deactivated equipment is forwarded for
disposal in a technically correct way.
You can obtain information regarding the disposal of the
tiller through the person in charge for the recycling in your
city.
WhatsApp:
+351 965 157 064
E-mail:
support@vito-tools.com
Publicidad
