Publicidad
Buttons for the Operation of Other TEAC
Components
1
TEAC System Remote-Controlled Operation (2)
2
3
4
CD SYNC button
1
When this receiver is used in a system with a TEAC CD Player
and a TEAC cassette deck (with full-logic control), it is
possible to synchronize the operations of the CD player and
cassette deck, so that they can be started at exactly the
same time for copying a CD onto a tape.
Note:
< In this configuration, the CD player's CD/DECK SYNC terminal
and the cassette deck's CD/DECK SYNC terminal should be
connected using the optional WR-7000 sync cable.
Synchronized operation of the CD player and cassette deck
can be started by pressing either the CD SYNC button on the
remote control unit or the CD SYNC button on the cassette
deck.
TAPE I buttons
2
The TAPE I mechanism of a double-transport cassette deck
with full-logic control can be operated using these buttons.
Notes:
< To start recording, simply press the RECORD button; it does
not have to be pressed together with PLAY.
< If the TAPE I mechanism of the double-transport cassette
deck does not have a recording function, pressing the TAPE
I RECORD button will have no effect.
TAPE II buttons
3
The TAPE II mechanism of a double-transport cassette deck
with full-logic control can be operated using these buttons.
They are also used to operate a single-transport cassette
deck with full-logic control.
Note:
< To start recording, simply press the RECORD button; it does
not have to be pressed together with PLAY.
CD buttons
4
MUSIC SKIP ( .,/ ) buttons: Each time these are
<
pressed, the pickup moves to the beginning of the next tune
in either the forward or reverse direction. If held depressed,
skipping continues until the button is released.
PAUSE ( J ), PLAY/PAUSE ( G/J ) buttons:
<
To temporarily stop CD play, press the PAUSE button if the
CD player has an independent PAUSE button; press the
PLAY/PAUSE button if it has a PLAY/PAUSE button.
STOP ( H ) button: Press to stop the CD player.
<
<
DISK SKIP button: Selects the next disc in a CD auto-
changer.
REPEAT (1/ALL, A-B) button: Each time the REPEAT button is
<
pressed, the REPEAT PLAY mode of the CD player changes.
<
SEARCH ( m,, ) button: These buttons are used for
searching for the desired position quickly during play or in
the pause mode.
: for forward search
,
: for backward search
m
ENGLISH
85
Publicidad
