HOMCOM A90-146V01 Instrucciones De Montaje página 23

.3 armrest installation armrest cover electronic meter installation
1） First, rotate the plum knob anticlockwise, pull it out, and then take out the armrest slide rail
and the lower cover of the armrest cover as shown in the figure, so that it can only penetrate
into the flat circle hole of the frame. After adjusting the height of the armrest fixing seat,
screw the ball head pull pin to take out the armrest,
Align the four bar holes on the armrest with the threaded holes on the armrest fixed base,
pad the flat pad, insert the cylindrical head screw, and then lock them one by one with the
hexagon wrench. Then use the hexagon wrench to lock one by one
2）fit the upper cover of the armrest cover to the armrest fixed base. Use the self tapping
screw and the cross screw driver end of the dual-purpose hexagon wrench to lock. (screw
hole under armrest cover)