HOMCOM A90-146V01 Instrucciones De Montaje página 25

.4 cushion installation and adjustment
1）Take the seat cushion, align the round hole at the seat cushion with the cushion shaft (if it
can't be put in, loosen the nut at the cushion with a wrench first) a nd insert the cushion shaft
to the bottom. When the cushion is placed exactly in the direction of the cushion, use an
open-ended wrench to tighten and adjust the height of the cushion. Now loosen the ball
head pull pin to the left, then pull the ball head pull pin, lift up or press down the seat cushion
to a suitable height, loosen the ball head pull pin, make the pin penetrate into the small hole
of the seat cushion fixed seat, and then lock the ball head pull pin. (the height adjustment of
armrest is the same)
Adjust the front and rear position of the cushion. Loosen the plum bolt, move the cushion
seat back and forth, and lock the plum bolt after adjusting to the comfortable position.