Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
1) If unit is not supplying oil to pan, check to ensure unit is plugged into a working electrical outlet.
2) Ensure suction and return tubes are submerged inside the oil and that oil supply is ample.
3) Ensure the suction tube is not touching the bottom of the Vegalube bucket.
4) Rotate the pizza pan 90 degrees and try again – a dented pan may not allow the proximity sensor to
pick up completely.
5) If the unit fails to turn on, unplug the machine, remove the four cover screws, and open the
machine door. Reset the circuit breaker inside the machine if it is tripped (green indicator). If the
unit is not tripped, a red indicator will be shown:
Figure 3. Non-Tripped (red) and Tripped (green) circuit breakers.
6) Replace door cover and reconnect the power supply to the electrical outlet. If the machine fails to
resume operation, or repeatedly trips, please contact:
Rev 8
PPO Support
(412) - 276 – 9000 Extension 60137
PPO.Support@vantagegrp.com
Mallet and Company, Inc., a Vantage™ business
563 Napor Blvd., Suite 195, Pittsburgh, PA 15205
Phone 412.276.9000 Ext. 60137 • Equipment Division
www.vantagegrp.com
11
Publicidad
