Stealth Products UniLink Manual De Usuario página 10

Installation
Pad Mount Installation
1. Place the conical socket of the Pad Mount (A)
onto the conical mount of the 1.5" Link (B).
2. Place the 1.5" Coupler
(C) onto the 1.5" Link
(B) as shown and
secure it with an M5
Flat Washer and M5 x
0.8 x 25mm Socket
Head Screw.
Thigh Pad Installation
1. Slide the Slab Nuts (A) into the
desired location in the pad
track.
2. Align the slots in the Pad
Mount (B) with the threaded
sleeves of the Slab Nuts (A)
3. Insert the M5 x 0.8 x 10mm
Socket Head Screws into the
threaded sleeves of the Slab
Nuts (A).
4. Align the pad in the desired
position and location and
tighten the screws to secure it
in place.
5
A
B
C
B
C
3. Adjust the angle of
the Pad Mount and
tighten the M5 x
0.8 x 25mm Socket
Head Screw.
A
EN