Stealth Products UniLink Manual De Usuario página 9

Standard Track Mounting
To install and adjust standard track mounting:
1. Insert the M6 x
1.0 x 12mm
Button Head
Screws (A)
through the
counter-bored
holes (B) and
into the
threaded holes
of the Universal
Track Nut (C).
3. To adjust the lateral on the track, loosen the screws
and slide it to the new position. Tighten the screws.
The use of improper tools may cause damage to the device.
Inadequate tightening can cause components to become loose and
cause discomfort for the user or premature failure.
EN
A
B
C
CAUTION
Installation
2. Set desired position
and tighten screws
with a 4mm Hex
Wrench.
4