Stealth Products UniLink Manual De Usuario página 11

Full-Surface Contact Mount Installation*
1. Place the conical
socket of the 17mm
Ball Link of the
17mm Ball Link (A)
onto the conical
mount of the 1.5"
Link (B).
2. Place the 1.5"
Coupler (C) onto the
1.5" Link (B) as
shown below and
secure it with an M5
Flat Washer and M5
x 0.8 x 25mm Socket
Head Screw.
* The Full-Surface Contact option will not fit UTS25100-L/R. The UTS2510F-L/R or UTS2530F-L/R must be used.
Full-Surface Contact Mount Adjustment
2. Rotate and/or adjust the
angle of the pad to the
desired position.
3. Tighten the screws evenly.
Any connection must always be secured with all delivered screws.
EN
E
Use only the screws provided in the package.
D
A
1. Loosen the M6 x 1.0 x 12mm
Button Head Screws (A) with a
4mm Hex Wrench.
A
CAUTION
C
B
Installation
6