Selco BOX BASIC RI 3000 Profinet-IO Instrucciones De Uso página 44

1 ETHERNET CONNECTOR
Pin Signal
1 TD+
2 TD-
3 RD+
4 Not used
5 Not used
6 RD-
7 Not used
8 Not used
2 STATUS INDICATORS
A LINK (ACTIVITY)
GREEN Link established
GREEN, flashing Receiving/Transmitting data
OFF No link or power off
B NETWORK STATUS
GREEN On line, Run
GREEN, 1 fash On line, STOP
OFF Off line
C MODULE STATUS
GREEN Initialized, no error
GREEN, 1 flash Diagnostic data available
GREEN, 2 flashes Reserved
RED, 1 flash Configuration error
RED, 3 flashes No station name or no IP address assigned
RED, 4 flashes Internal error
OFF No power or not initialized
D NOT USED
Consul the site: http://www.anybus.com/support/support.asp?PID=280&ProductType=Anybus-S,
Document: Fieldbus Appendix
44