FURNITURE TIPPING DETERRENT HARDWARE
QUINCAILLERIE ANTI-RENVERSEMENT DES MEUBLES
HERRAJES ANTIVUELCO DE MUEBLES
Tipping furniture may injury young children . Use of this tipping restraint hardware is highly
recommended.
This hardware , when peoperly installed , could provide protection against the unexpected
tipping of furniture due to improper use .
This hardware is only a deterrent.Adult supervision is the only proper deterrent to prevent improper use of
any potentially hazardous product.
1. Attach one of the mounting brackets securely to the back top edge of the furniture using the short screw.
2. Find the stud in the wall and mark the location on the wall for mounting the second bracket using a 2"
wood screw approximately 2" below the bracket mounted to the edge of the furniture.
3. If a stud cannot be found,purchase a "Hollow-Wall Anchor Bolt" and attach the second bracket to the wall
using that bolt.Make sure to follow all instructions by the manufacturer.
4. Place the furniture so the bracket on the back edge is in line with the bracket on the wall.
5. Lace an end of the nylon restraint strap down through each bracket.Bring both ends together and slide
the beaded end of the strap through the key hole shaped slot in the other end tightly.Pull down on the
beaded end until it snaps locks into the keyhole.
6. Check to make sure the strap is securely laced and locked to the brackets.
WARNING
14
j
HOW TO LOCK
COMMENT VERROUILLER
CÓMO BLOQUEAR