Publicidad
Idiomas disponibles
Idiomas disponibles
EN
English
1. Technical Data (See figure 1.)
Technical Data
Unit
CP81020
CP81030
CP81050
CP81080
CP81120
CP81200
CP81300
CP81121
CP81122
CP81201
CP81501
Static coefficient test: 1.5 / Dynamic Coefficient test: 1.25 .
All values are current as of the date of this publication. For the latest information please visit www.cp.com.
2. Machine type(s)
• A Bottle jack is a device which you use for lifting a vehicle in order to ensure the accessibility for repair and maintenance work. No other use
permitted. For professional use only.
• A Bottle jack is only a lifting device and must not be used for transportation or for loading of a vehicle.
• Maneuvering under load is prohibited.
• Please also mind the product safety information!
3. Mounting instruction
WARNING
Make sure every parts are fixed and tightened.
• Remove the device, including the enclosed items.
• Assemble the two or three parts handle. (Fig.02(2)).
• Now place the lever rod to the lifting device and place the lever rod into the support (Fig.02(1))..
• Before using the Bottle jack it is necessary to purge the hydraulic circuit. To tackle this kind of problem please proceed as follows.
Open the discharge valve by turning the lever rod anticlockwise whilst simultaneously pumping with the lever (5-6 times).
Afterwards, pump the jack up to its maximal height before lowering it again. The hydraulic system is purged.
Caution
Working area of 1 m must be kept free both in front of and behind the machine while it is in operation so that it is always
easily accessible.
Scale: 1:1
Document Ref: 8940169914_REV: 01 _ 05-2012
4. Operation
Caution
Please position the Bottle jack underneath the lifting points of the vehicle.
• When operating the device, the safety guidelines must be taken strictly into account.
• Always position the lifting jack in such a way that it cannot be operated from underneath the car.
• Always make use of the vehicle manual in order to identify the correct lifting points of the vehicle.
• Use the lever rod to bring the lifting device to the desired height (Fig.03 (2)). Make sure that the hydraulic valve is closed. For this purpose it
is necessary to fasten the lever rod clockwise.
• The lifting devices are provided with an overload valve, which has been adjusted by the manufacturer. This valve must never be readjusted.
• In order to lower the load turn the lever rod slowly anticlockwise (Fig.02(3&4) & Fig.03(3)).
Scale: 1:1
Document Ref: 8940169914_REV: 01 _ 05-2012
• When not using the Bottle jack the piston / lifting arm must be pulled in.
WARNING
Never use the lifting jack in order to leave the car lifted. Always use chassis stands (Fig.03(4)).
WARNING
Make sure that no person stays in the vehicle that will be lifted. Turn off the engine and put on the handbrakes of the vehi-
cle. Use wedges to prevent the vehicle from moving (Fig.03(1)). Do not get into the vehicle and do not turn the engine on.
WARNING
It is not allowed to work under the raised load until it is secured by suitable means.
WARNING
The operator shall be provided with all necessary information about training and about pumping and translating forces.
Weight
Lifting capacity
[kg]
[kg]
2.4
2000
2.9
3000
3.8
5000
5.8
8000
6.7
12000
9.1
20000
18.3
30000
9.5
12000
5.9
12000
13
20000
35.3
50000
CP81020/CP81030/CP81050/CP81080/CP81120/CP81200/
CP861300/CP81121/CP81122/CP81201/CP81501
A
B
C
[mm]
[mm]
[mm]
180
125
55
190
135
65
200
140
60
200
120
80
180
95
75
185
95
35
285
170
------
240
150
90
155
70
45
275
170
70
300
180
------
Bottle Jack
D
E
F
G [ø]
[mm]
[mm]
[mm]
[mm]
360
120
80
20
390
125
85
23
400
140
90
29
400
160
100
35
350
175
120
43
315
195
145
53
455
200
150
62
480
195
145
43
270
140
105
43
514
205
140
53
480
220
175
66
Publicidad
