vitapur VWD5446BLS Manual De Uso Y Cuidado página 9

Operation
1. DISPENSING COLD WATER
2. DISPENSING HOT WATER
Warning:
above 125˚ F / 52˚ C can cause severe burns from scalding. DO NOT ALLOW
CHILDREN TO USE THE HOT WATER DISPENSING BUTTON WITHOUT
PROPER AND DIRECT SUPERVISION
1
4
3. ADJUSTING THE COLD WATER TEMPERATURE
² By turning the thermostat (H) at the back of the unit,
the temperature can be adjusted. Turn the dial clock
wise between the Min. (cool) and Max. (colder) levels
until the desired temperature is reached.
Note:
If the water dispenser is not
dispensing water, there could be a possible
ice build up due to the thermostat being
set too cold. If this happens, unplug the
dispenser overnight and then reset. Set
thermostat to Min, slowly increasing based
on your use and need for cold water.
194˚ F / 90˚ C
The hot water is heated to approximately 194˚ F / 90˚C. Temperatures
2
5
3
6
TEMP
Min.
7
Max.