Dell EMC PowerEdge T130 Manual Del Propietário página 74

Figure 30. Installing the optical drive filler
1 optical drive bay
3 optical drive filler
Next steps
1 Install the hard drive cage.
2 Reconnect the disconnected data and power cables to the hard drives and optical drive.
3 Install the bezel.
4 Reconnect all peripherals disconnected from the control panel assembly.
5 Follow the procedure listed in
Removing the optical drive
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1 Ensure that you follow the
2 Follow the procedure listed in
3 Disconnect all peripherals connected to the I/O module.
4 Remove the bezel.
5 If connected, disconnect the power and data cables from the optical drive and hard drives.
6 Remove the hard drive cage.
Step
Press down and push the blue release tab and push the optical drive out of the hard drive cage.
74 Instalación y extracción de los componentes del sistema
Después de trabajar en el interior de su
Instrucciones de seguridad.
Antes de trabajar en el interior de su
2 tabs (4)
4 hard drive cage
equipo.
equipo.