STERWINS 1300 JET AUTO 5I-3 Manual De Instrucciones página 124

5. BEFORE FIRST USE
• If you cannot obtain a suction-hose set like above, please purchase (Fig.
- an 25 mm (1") intake hose
- an intake valve with a strainer
- 2 hose clamps
and assemble the suction-hose set yourself using a standard adapter
C
Preparing the discharge line
• The discharge line (min. 19 mm (3/4")) must be connected to the discharge connector
either directly or with the aid of a standard adaptor
• With the right couplings it is also possible to use a 13 mm (1/2") delivery hose. The smaller
delivery hose results in a lower delivery rate.
• During the priming operation, fully open any shut-off mechanisms (spray nozzles, valves,
etc.) in the discharge line so that the air can escape without obstruction.
Preparing the Pressure Control Unit
FEATURES:
• 1" male inlet and 1" male outlet
• Special non-return valve to prevent surges.
• Security system prevents pump from running dry.
• Starting pressure of 1.5 Bar.
EN
20151209 SPECIFICATIONS 1300 JET AUTO 5I-3.indd 124
14
15
and 2 standard adapters
16
14
16
17
15
124
C
(1 for the intake line, 1 for discharge line)
17
17
and clamp .
17 16
):
and a clamp .
16
6
09/12/15 14:41