Push the levers on both the hinges up and forward until
5.
they are locked into the slot and flush with the front of
the oven body.
Close and open the door slowly to be sure it is correctly
6.
and securely in place.
Testing the operation
8 Testing the operation
Check if your unit is working properly after you have com-
Testing the operation
pleted the installation steps.
Turn on power at the breaker.
1.
To test the oven select the BAKE mode. See the User
2.
Manual for detailed operating instructions.
Verify that the oven light comes on and the oven begins
3.
to preheat.
To test the door lock set the SELF CLEAN mode. Con-
4.
firm that the door locks when the lock icon appears in
the display.
9 Customer Service
Customer Service
With any warranty repair, we will make sure your appli-
Customer Service
ance is repaired by an authorized service provider using
genuine replacement parts. We use only genuine replace-
ment parts for all repairs.
Detailed information on the warranty period and terms of
warranty can be found in the Statement of Limited Product
Warranty, from your retailer, or on our website.
If you contact the Customer Service, you will need the
model number (E-Nr.) and the production number (FD) of
your appliance.
USA:
1-800-735-4328
www.thermador.com/support
www.thermador.com/us/accessories
CA:
1-800-735-4328
www.thermador.ca
www.thermador.ca/en/support/filters-cleaners-accessories
For assistance with connecting to Home Connect™, you
can also view instructions here:
www.home-connect.com/us/en/help-support/set-up
9.1 Model number (E-Nr.) and production
number (FD)
You can find the model number (E-Nr.) and the production
number (FD) on the appliance's rating plate.
Making a note of your appliance's details and the Cus-
tomer Service telephone number will enable you to find
them again quickly.
9.2 Rating plate location
You can find the rating plate of your appliance:
On the backside of the toe-kick panel. Remove the toe-
¡
kick panel to view it.
Rating plate
Testing the operation en-us
15