MESTO 3275PP Instrucciones De Uso página 15

EN
+
You will find the illustrations referred to above in the pages 3 – 5 of these
instructions for use.
Scope of delivery
Tank [1], pump [2], hose [4], instructions for use [5], spray wand [7], shut-off valve [9], car-
rying strap [6], bow [50], cap nuts [37]. (Fig. 1a and 1b)
Technical data
Type of device
Max. filling amount
Total contents
Max. spraying pressure
Max. operating temperature
Weight when empty
Gross weight max.
Material of tank
Where device is carried
Technical residual quantity
Max. volume flow
Recoil force
Pressure change from 0 to 3 bar
Table 1
Assembly
1. Attach the carrying strap [6] on the tank. (Fig. 2)
2. Push the hose [4] into the fixture [10] and secure it with the cap nut [37]. (Fig. 3)
3. Push the hose [4] onto the shut-off valve [9] and secure it with the cap nut [37]. (Fig. 3)
4. Screw the spray wand [7] onto the shut-off valve [9] (Fig. 3)
5. Screw the bow [50] onto the spray wand [7]. (Fig. 3)
Checks
Visual inspection: Are the tank [1], pump [2], hose [4], shut-off valve [9], piston pressure
gauge[16], and spray wand [7] and elbow [50] with nozzle [21] undamaged? (Fig. 1)
+
Pay special attention to the connections between the tank – hose and the hose – shut-off
valve and to the condition of the pump threading and spray wand.
No leaks: Pump up the empty device to 2 bar (29 psi) (Fig. 11).
► The pressure must not decrease more than 0.5 bar (7,35 psi) within 30 minutes.
Function: Pull up the piston pressure gauge handle [16]. (Fig. 5)
► The pressure must dissipate.
+
Using the lock [40] the lever on the shut-off valve [9] can be locked and unlocked.
Unintentional spraying is prevented after locking. (Fig. 14)
► If required, reset the lock [40] and activate the shut-off valve [9]. (Fig. 14)
► The shut-off valve must open and close.
Check the device regularly and after a longer period of non-use, e.g. a winter break.
Have damaged parts or parts that do not work properly repaired immediately by our
customer service department or by service partners authorized by us.
3270PP, PE
3270P
10 l (2.64 gal)
12.5 l (3.3 gal)
3 bar (44 psi)
40 °C (104° F)
2.9 kg (6.4 lbs)
12.9 kg (28.4 lbs)
polyethylene
on the side
min. 5000 x
15
ENGLISH
3275 PP, PE
3275P
5 l (1.3 gal)
8 l (2,1 gal)
2.6 kg (5.7 lbs)
7.6 kg (16.5 lbs)
< 0.07 l
1 l/min
< 5 N