ASHDOWN ENGINEERING - PRO FX
Specifications:
Specifications:
- Sensitivity Control
- 3 Way Filter Switch
- Output Control
- Momentary switching
- 18 volt - Power Supply (Not Included)
Weight & Dimensions:
Weight & Dimensions:
H: 58mm (inc Pots) - 2.2"
W: 105mm - 4.1"
D: 117mm - 4.6"
Kg: 0.6
Lbs: 1.3
USER GUIDE
TYPE 23
Type 23 - 3 Band Dynamic Filter Pedal
Not one, not two, but three bands of dynamic filters that
sweep your bass tones under the control of the 'high' , 'low'
or 'blended' filter frequency; generating speech like and
funky bass sounds.
The Type 23 is a triple voltage controlled envelope filter
with two of the filters being switchable between high band
and mid band.
The single sensitivity control effects the amount of which
the oscillating filter reacts with the instrument and allows
for a large range of Auto-Wah and Envelope effects, letting
your inner-funk shine through.
Adding more tonal capabilities, there's a handy switch on
the bottom of the pedal which further varies the frequency
of the selected 'high' , 'low' or blended filter oscillation fre-
quency ¬– to tailor the nature of the desired effect amount.
USER GUIDE
The T23 pedal is a pure analogue pedal; it consists of a
detector circuit that changes the signal from the bass to a
control voltage that is then sent to three voltage controlled
filters.
This effectively means that the filters are sensitive to your
playing style and will respond accordingly with more effect
the harder you play.
The sensitivity control has enough range to cope with a
variety of basses but occasionally it may be found that with
High output type basses the filters may be overloaded due
to excessive input. A small slide switch has been incorporat-
ed in the base of the pedal to allow the input sensitivity to
be reduced to suit instruments with a high output.
This rotary control sets the level of signal passing to the
control circuit for the filters and therefore the overall effect,
experimentation will be required to get the exact sound
you have in mind, consistent playing will be required as the
filters are touch sensitive.