FITFIU FITNESS BESP-20 Manual De Usuario página 41

BESP-20
STEP 5: Remove the display bolts (53), then
connect the display (40) to the bracket with the 4
bolts (53). Insert the sensor cable into the back of
the display (40).
BEFORE USING THE PRODUCT
ADJUSTMENTS
Vertical seat adjustment
To adjust the seat height, loosen the vertical post knob on the main frame. Pull it out, place the vertical seat post at the
desired height so that the holes are aligned, release the knob and retighten.
HORIZONTAL SEAT ADJUSTMENT
To move the seat forward in the direction of the handlebar or backward, loosen the adjustment knob and washer and
pull the knob back. Slide the horizontal seat post into the desired position so that the holes are aligned and retighten
the adjustment knob.
HANDLEBAR HEIGHT
To adjust the handlebar height, loosen the knob and secondary lever and pull back. Slide the handlebar post along the
main frame housing to the desired height and, with the holes aligned correctly, tighten the adjustment knob and then
the secondary lever.
ADJUSTING THE STABILISERS
To adjust the levelers and ensure that the bike is stable on the ground, turn the levelers clockwise or counterclockwise
until they are stable.
EN
41