Publicidad
Idiomas disponibles
Idiomas disponibles
Refrigerator Temperature Control
To adjust the temperature in each zone, press the appropriate zone button, the selected zone will flash on and off.
The temperature will change according to the pre-set temperatures as shown below, you will hear a bell chime
with each press of the control panel buttons.
OPERATING YOUR APPLIANCE
CONTROL PANEL – CHILD LOCK
The CONTROL PANEL LOCK is designed to prevent any changes to the settings to the
refrigerator.
To enable the CHILD LOCK, press the LOCK button, the CHILD LOCK icon will turn on.
The control panel will be locked until unlocked at the control panel or there is a loss of
power.
To disable the CHILD LOCK, press and hold the lock button for approximately 3
seconds until the LOCK icon turns off and the control panel is working in normal
operation mode.
CONTROL PANEL – STANDBY
The CONTROL PANEL will go dark after approximately 20s of no activity To
reactive the display, simply press any of the buttons on the control panel.
Setting the Temperature Control
Your unit has one control for regulating the temperature. The temperature control is
located on the outside of the refrigerator compartment door.
The first time you turn the unit on, the unit will start at the default temperature set at the
factory, 41ºF in the refrigerator section and -04ºF in the freezer section.
The first time you turn the unit on, adjust the temperature in the refrigerator compartment
to 36ºF and run for at least 4 hours before placing foods inside. This will ensure the
freezer cabinet is thoroughly chilled and the refrigerator compartment will be stabilized
before food is placed. Then adjust the temperature setting to your desired setting that
best suits your needs.
9
Publicidad
