Masterpro BGMP-9142 Manual De Instrucciones página 16

EN
6. Disassemble the cup from the main device.
USAGE WITH VACUUM STORAGE CONTAINERS, BAGS
• Assemble the vacuum tube on the vacuuming device.
• Select the vacuuming head with smaller or larger diameter (according to the selected vacuuming
valve). Disassemble if you need one with smaller diameter.
• VACUUM STORAGE CONTAINERS: Put in the ingredients and make sure that is locked well.
Place the vacuuming head over the valve and hold flat against it firmly. Use the VACUUM MODE,
according to the instructions above. To release the vacuum, lift the valve and open the container.
• VACUUM STORAGE BAGS: Put in the ingredients and make sure that it is sealed well. Place the
vacuuming head over the valve and hold flat it firmly. Use the VACUUM MODE, according to the
instructions above. To release the vacuum, unzip the bag.
10
BLENDING WITH THE PITCHER
1. Open the lid of the jug and 2. Open the lid on the filter and
insert the filter to the jug. put ingredient .
4. Close and lock the jug lid.
6. Press the BLEND MODE button and the mode light
will start to flash. Press the button to start the BLEND
cycle, you will hear the beep sound and the mode light
will turn on. After the cycle is completed, the device will
stop and switch to stand by mode automatically.
3. Close the filter lid.
5. Place the jug onto the base.
11
EN