Masterpro BGMP-9142 Manual De Instrucciones página 19

EN
CLEANING AND MAINTENANCE
• Before you clean the device, unplug it.
• The blades are sharp. Be careful when you clean blade units.
• Make sure that the cutting edges of the blades do not come into contact with hard objects. This may
cause the cutting edges to become blunt.
• Clean the motor unit with a damp cloth and dry thoroughly.
• Clean other parts in lukewarm water with some cleaning agent or in a dishwasher. Refer to the
cleaning table.
• If ingredients dry inside the blending vessels, fill the cups about 2/3 full with warm soapy water.
Assemble according to the instructions and blend the content for 20-30 seconds. Scrub gently and
rinse.
• Clean the 6 wing blade assembly rubber gasket regularly. Grab and lift the gasket from the base
and wash under warm water.
• Before storing the device you can wind the cable in cable storage at the bottom of the device.
TROUBLESHOOTING
ISSUE POSSIBLE SOLUTION
The device does not start to work. Check if the plug is properly inserted into the power supply socket.
Check if all the removable parts are properly assembled.
The smoke comes out of the air vent. Stop and unplug the appliance immediately. Leave to cool down
for 15 minutes before further use.
The device stopped working during Total continuous operation time 230 s could be exceeded. Set to
the cycle. mode 0, unplug it and leave to cool down for 10 minutes.
16
SYMBOL CHART
CAUTION! Rotating parts. Do not touch, clean or replace before unplugging the device
from power supply.
Regular cleaning is necessary. Inspect and clean any spillages, residues or dirt after
each use.
Failing to do that could greatly reduce performance of the device and/or increase the
possibility of device or personal damage.
Do not immerse in water/liquid.
Indoor use only.
Make sure you have read and fully undersood user manual before operating this device.
Unplug from power supply before parts assembly or cleaning.
CAUTION: Do not exceed maximum allowed operating and rest time.
CAUTION: Danger of overheating if maximum operating time is surpassed or hot content
is grinded.
STOP
Do not attempt any modification or repair by yourself.
CAUTION! Sharp objects. Use extreme care.
CAUTION! Hot surface.
Not dishwasher safe.
17
EN