Masterpro BGMP-9142 Manual De Instrucciones página 13

EN
replacing accessories or during cleaning.
14. Do not submerge the main unit or the heating jug in any liquid when cleaning the device. They are
not dishwaher safe!
15. To avoid the risk of electrical shock, do not put the cord, plug or appliance in or near water or other
liquids.
16. Do not place the device on or near a hot gas plate, hot electric burner, in a heated oven or a
microwave.
17. The maximum temperature of the liquids you pour into the cup or the jug, should not exceed 40°C.
18. Do not overfill the cup or the heating jug over the MAX line
19. We recommend to wash and dry the device thoroughly before it's first use.
20. If the blades get stuck, unplug the device before removing the ingredients.
21. Use extreme caution when handling the sharp blades, emptying the cup or the jug, to avoid any
injuries.
22. Use only attachments that are provided, recommended or sold by the distributor.
23. The use of attachments or accessories not recommended or sold by the product distributor may
cause personal or property hazards or injuries.
24. Although the product has been checked its usage and consequences are strictly user responsibility.
USING THE FUNCTIONS
NOTE: Stop and unplug the appliance if there is strong smell or smoke coming from device. Let it
cool down for 15 minutes before further use.
• Do not add heavy ingredients such as bread dough or mashed potatoes – to avoid overloading the
device.
• To minimize overloading chance the device you can add more liquid ingredients or process several
small batches of food.
• The content should NEVER exceed max level marked on the cup or jugs. The exceeding can cause
device overheating.
• The content temperature at the beginning of the process should NEVER exceed 40 °C.
• Powdered ingredients (powdered sugar, cocoa, proetein powder) should be blended briefly with
liquid in a separated container before using.
• Use only accessories intended for selected mode.
• OVERHEATING PROTECTION: The device has safety protection system. When the device runs
continuously for over 230 s, it will stop automatically. If you have not finished processing, set the
device to "OFF mode" and let it cool down for 10 minutes. After that set the mode knob to same
mode and continue to use.
• Precut food to pieces approximately 2 x 2 x 2 cm.
• Always crush the ice with small amount of water.
• Make sure to place and seal the silicone valve correctly – refer to the vacuum valve assembly/dis-
assembly instructions. Incorrect assembly can lead to poor or no vacuuming performance.
• If the food sticks to the wall of the blender jar, switch off the device and unplug it. Then use soft
spatula (not supplied with the product) to remove the food from the wall.
• If bubbles/foam expands beyond the MAX level indication, stop the vacuum operation immediately.
• Never vacuum or blend carbonated beverages. Build up pressure from released gasses can cause
container to burst, resulting in possible injury.
The vacuuming device can be used independently (without the main unit) as well. Use it with
vacuuming tube or press the vacuuming device nozzle onto the vacuum valve directly (if fits to the
04
size) and vacuum by pressing the vacuuming button until it stops automatically indicating that
maximum vacuum has been reached.
VACUUMING BLENDING
USAGE WITH 700 ML CUP AND 6 WING BLADE ASSEMBLY
1. Disassemble the blade 2. Fill in the ingredients up to
assembly to the cup by the MAX level marked on the
rotating it counter-clockwise. cup.
NOTE: The content should
never exceed the MAX level.
4. Place the cup onto the main 5. Insert the vacuuming device into the main body (remove cover
unit and rotate it clockwise before that if needed) flip it to 90°, attach the vacuuming nozzle
until you hear »click« sound. onto the valve and press the head down slightly.
3. Assemble the blade
assembly to the cup by
rotating it clockwise.
MAX
05
EN