Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
5.2 OPERATION MODE (COOLING, HEATING,
DRY, COOLING/HEATING AUTOMATIC
AND AIRFLOW OPERATION)
5.2.1 Function
• Cooling Operation (COOL): To decrease the room
temperature.
• Heating Operation (HEAT): To increase the room
temperature.
• Dry Operation (DRY): To decrease the humidity in the room.
• Cooling/Heating Automatic Operation (AUTO): To cooling
and heating automatic changeover.
• Airflow Operation (FAN): To circulate the air in the room.
5.2.2 Before Operation
!
C A U T I O N
•
Turn ON the power supply for the air conditioner.
•
To protect the compressor unit, the power supply should be
energized 12 hours before the startup operation is begun.
•
Do not turn OFF the power supply during in-season heating or
cooling operation.
•
Make sure that the outdoor unit is always free of ice and snow. If
snow covered, remove it by using hot water (cooler than 50
water temperature is higher than 50
By pressing "Mode", the operation mode will be adjusted as
follows.
?
N O T E
The advanced setting is required for "AUTO" operation mode. Contact
your distributor or dealer for detailed information.
5
PMML0497 rev.1 - 12/2020
C).If the
o
C, it will damage plastic parts.
o
COOL
HEAT
DRY
(AUTO
)
FAN
5.3 AUTOMATIC COOLING/HEATING
OPERATION
In case dual setpoint is selected in automatic cooling/heating
operation, during auto mode both cooling setpoint and heating
setpoint can be selected.
Automatically and according the indoor temperature the mode
changes as follow:
when mode is in cooling, the mode is change to heating if the
indoor temperature is the "heating setpoint" -1°C.
when mode is in heating, the mode is changed to cooling if the
indoor temperature is the "cooling setpoint" +1°C.
?
N O T E
In case of AUTO COOL indication.
By pressing "Mode", the operation mode will be adjusted as
follows.
(AUTO
(AUTO
?
N O T E
•
For Auto COOL/HEAT, though the temperature indication on display
changes by pressing "Mode", the actual operation mode remains as
"AUTO" and it does not change between AUTO COOL and AUTO
HEAT.
•
Advanced configuration is needed for the use of automatic cooling/
heating operation and changing AUTO HEAT/COOL temperature.
•
Contact your distributor or dealer for detailed information.
COOL
HEAT
DRY
)
)
FAN
Publicidad
