Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
5.4 SETTING METHOD
5.4.1 Temperature Setting
• By pressing "Temp ˄ ", the temperature is increased by
0.5°C (Max. 30°C).
• By pressing " ˅ Temp", the temperature is decreased by
0.5°C.
• Cooling, Dry, Airflow operation: Min. 19°C
• Heating operation: Min. 17°C
?
N O T E
Minimum and maximum temperature levels can be adjusted by setting
the lower limit (set temperature for cooling) and the upper limit (set
temperature for heating) from the function selection.
5.4.2 Fan Speed
By pressing "Fan", the fan speed will be adjusted as follows.
?
N O T E
•
During the dry operation, the fan speed is automatically adjusted
to "LOW " and cannot be changed to another fan speed. ("LOW "
will NOT be displayed on the LCD (liquid crystal display) at this time.
The present setting condition will be displayed on the LCD.)
•
The fan speed settings "HIGH2" and (or) "AUTO" might not be
available depending on the type of indoor unit.
6
PMML0497 rev.1 - 12/2020
LOW
MEDIUM
HIGH
HIGH2
AUTO
5.4.3 Swing Louver Direction
By pressing "Louver", the louver direction will be adjusted as
follows.
LCD Indication
:
The Auto-swing operation will start. At this time, the
louver graphic will swing repeatedly on the LCD display.
?
N O T E
•
The airflow angle is different for each indoor unit type. Check for
detailed information in "Swing Louver Direction" of each operation
manual for indoor unit.
•
Louver action as depicted on the LCD display might not mimic the
actual movement of the louver during the auto-swing operation.
To adjust louver position, first set the angle new angle on the LCD
display.
•
Louver action might not stop immediately after the switch is pressed.
HEAT,
COOL,
FAN
DRY
Auto-Swing
Recommended
angle
Angle
range
Angle
range
Recommended
angle
Publicidad
