Getting to know your telephone
Volume keys
During a call, set the volume for the receiver/headset or speaker or in the case of an incoming
call, set the volume of the ringtone (5 levels).
¤
Press the volume keys on the right side of the handset:
(louder) /
The current setting is permanently saved after approx.
two seconds (
Extra-loud function
¤
Press the top volume key
level.
The extra-loud setting only applies for the duration of the call.
•
This setting can result in harm to health in persons with a normal hearing ability
and is only intended for persons with a hearing impairment or reduced hearing.
•
Disruptive noises on the phone line can be increased.
Direct dialling keys A to D
You can store particularly important numbers called frequently under the four Direct dial keys.
You can assign an external number or an internal call to every direct dial key.
To dial these saved numbers, press the relevant direct dialling key
on the base.
You can also assign the emergency function to direct dialling key
Assigning a function to direct dialling keys
Prerequisite: The direct dialling key in question has not already been assigned a function.
¤
In idle status, press the direct dialling key (
assign a function.
Select the relevant function using
¤
Label with Ext. No.
¤
Label with Internal Call
If more than one other handset is registered:
¤
Label with Call All Int.
¤
Label with Dir. Number Label the key with a number from the directory. The directory is
The labelling of the direct dialling keys applies to the handset and the base.
14
(quieter)
page 45).
until you reach the highest
:
Enter an external phone number directly.
¤
Enter the number and press OK.
¤
Enter the name and press OK.
Direct dial to a handset registered to the same base.
Direct dial to all handsets registered to the same base.
opened.
Availability and operation of the functions
may differ on your telephone.
to
) on the handset to which you wish to
Select handset
Select a number and press OK.
Volume:
Back
to
on the handset or
(
page 27).
OK
OK
en fr es