Siemens milltronics MSI Guia De Inicio Rapido página 4

Safety Guidelines
Warning notices must be observed to ensure personal safety as well as that of others, and to
protect the product and the connected equipment. These warning notices are accompanied by
a clarification of the level of caution to be observed.
WARNING: relates to a caution symbol on the product, and means that failure to
observe the necessary precautions can result in death, serious injury, and/or
considerable material damage.
1
WARNING : means that failure to observe the necessary precautions can result
in death, serious injury, and/or considerable material damage.
means important information about the product or that part of the operating manual.
Note:
Milltronics MSI/MMI Belt Scale
WARNING: Milltronics MSI/MMI is to be used only in the manner outlined in this
manual, otherwise protection provided by the equipment may be impaired.
Note: This product is intended for use in industrial areas. Operation of this equipment in a
residential area may cause interference to several frequency based communications.
Milltronics MSI is a heavy-duty, high accuracy full frame single idler belt scale used for
process and load-out control. Milltronics MMI belt scale consists of two or more MSI single
idler belt scales installed in series.
Each MSI includes:
• one weighbridge with two load cells
• Siemens test weight(s)
The addition of an idler (supplied and installed by the customer) to the weighbridge completes
the weighing assembly. The MSI load cells provide an electronic signal, proportional to load,
which is fed to the Siemens integrator. Thus, weighing is accomplished without interrupting
the process and without affecting the process material.
The MSI is an accurate and repeatable force sensor. Its performance is ultimately dependent
upon the conveyor system and the quality of the installation and alignment.
Specifications
For a complete listing, see Milltronics MSI/MMI Instruction Manuals. For Approvals
information, please refer to the process device tag.
1.
This symbol is used when there is no corresponding caution symbol on the product.
Page EN-2 Milltronics MSI/MMI – QUICK START MANUAL
1
7ML19985XK81