Siemens milltronics MSI Guia De Inicio Rapido página 6

Installation
Notes:
• Installation shall be performed only by qualified personnel in accordance with
local governing regulations.
• Use only approved conduit and conduit fittings or cable glands to maintain NEMA
or IP rating, as applicable.
• For hazardous area installations, use only approved junction boxes, metal conduit
and conduit fittings or cable glands.
Installation guidelines
• The unit must be inspected for damage after removal from shipping frame.
• Be sure conveyor design meets installation requirements for Milltronics MSI scale.
• Conveyor stringers must be rigid, straight, parallel to, and square with belt line in scale
installation area.
• Idler and at least the next two approach and retreat idlers must be of same style
manufacture and in good condition.
Installation Precautions
The following precautions should be observed when handling the scale.
• Do not pry on the idler, its mountings, or the cells directly.
• Do not stand or lean on the scale.
• Avoid shock from blows of a hammer when trying to position the scale during
installation.
• Do not lift the MSI by its idler.
Page EN-4 Milltronics MSI/MMI – QUICK START MANUAL 7ML19985XK81