KPS -LX20 Manual De Funcionamiento página 26

damaged during storage and transportation. In case of any damage, please
contact the supplier.
2) Placement
- Operational temperature and humidity range: -10ºC~50ºC (14~122°F)
<80%RH (non-condensed)
- Storage temperature and humidity range: -10ºC~+50ºC (14~122°F) <70%RH
(non-condensed)
To avoid faults, please DO NOT place the light meter in following environments:
- Direct sunlight
- High temperature
- Mist /splash
- High temperature/condensation
- Dust
- Corrosive or explosive gas
- Intensive electromagnetic environment
- Mechanical vibration
3) Use
• The operation temperature range for the light meter is -10 and +50ºC (14-
122°F).
• In order to avoid damage, especially falling accidents, handling and use
should be avoided during severe mechanical vibration.
• The light meter can only be calibrated and repaired by professional person-
nel.
• Before each use, the opto-sensor of light meter should be checked for da-
mage and dust. Make sure the meter is in good, smooth and clean condi-
tions. If one or more functions of the light meter are irregular or not ready for
operation, avoid using the meter.
• During the operation of the light meter, the meter measurement value should
not be at OL for long time.
• Keep the meter out of direct sunlight to guarantee its normal operation and
KPS-LX20 • Digital light meter
Notice
26