KPS -LX20 Manual De Funcionamiento página 37

KPS-LX20 • Digital light meter
of LCD interface, and the device will exit the peak value measurement mode
and return to auto measurement mode (as shown in 5-1-2C).
Figure 5-1-2A
• Only in auto measurement mode, peak value measurement mode, max/min
value inquiry mode and data hold mode, it will be effective to press and hold
REL/PEAK key for a short time.
• In non-zero calibration mode, press and hold "REL/PEAK" for one second,
the device will enter the peak value measurement mode.
5.3 Maximum/minimum value inquiry mode
• Press and hold "MAX/MIN" key for a short time, "MAX" will appear on top
LCD interface (as shown in figure 5-1-3).
• In max/min value inquiry mode, press "MAX/MIN" key once, you will switch
MAX to MIN or MIN to MAX.
• Press and hold "MAX/MIN" for one second, "MAX/MIN" on top LCD interface
will disappear, and the max/min value inquiry mode will exit.
Figure 5-1-2B
Tips
Figure 5-1-3
37
Figure 5-1-2C