Medtronic GUARDIAN 4 Manual Del Usuario página 23

11. Disconnect the tester from the transmitter by gently squeezing the arms of the tester.
Removing adhesive residue
Follow these instructions if there is adhesive residue present on the transmitter.
Use cotton swabs and a medical adhesive remover such as Detachol™*, a mineral spirit, to remove
adhesive residue.
Note: During testing, Detachol™* was used to remove the adhesive residue from the transmitter.
Detachol™* is recommended for use but may not be available in all countries.
To remove adhesive residue:
1. Make sure the tester is attached to the transmitter.
2. Soak a cotton swab in the medical adhesive remover.
3. Hold the tester and gently rub the adhesive remover on the transmitter until the residue is
removed.
23