GOAL ZERO YETI 200X Manual Del Usuario página 4

Charging Your Goal Zero Yeti
CHARGE ME NOW: Before using or storing, plug your Goal Zero Yeti into the wall until it is
fully charged. Keep your Goal Zero Yeti plugged in when not in use. For more tips and tricks
on keeping your battery healthy, see the BATTERY 1 0 1 section.
When charging your Goal Zero Yeti you will notice a lightning bolt icon that flashes blue in the display.
This indicates that it is charging. Once your Goal Zero Yeti is fully charged, the battery display
indicator will read 100.
Charging from Solar
IMPORTANT NOTE: When solar recharging your Goal Zero Yeti Lithium, take note of the
voltages of the solar panels and do not exceed 22V. Individual solar panels, or solar panels
chained in series in excess of 22V cannot be used with the Goal Zero Yeti Lithium and can
cause serious damage to the unit. For help on chaining solar panels, call our Customer
Solutions Center at 888-794-6250.
The Goal Zero Yeti's charging port is located on the back of the Yeti and has a blue ring around it.
This 8mm port is designed to work with Goal Zero solar panels and is capable of taking in 120W of
solar.
1. Place your solar panel where it will get as much direct sunlight as possible.
2. Insert the blue-ringed plug from the panel into the input port on the back of the Yeti. You will
know the Yeti is charging when the lightning bolt icon is flashing blue on the display. The Yeti is
fully charged when the battery display indicator reads 100.
3. Some Goal Zero panels are chainable to provide more power to your Yeti and reduce
solar charge times. The input port is capable of taking in 120W of solar.
4
Charging from the Wall
Using the included AC Wall Charger, plug your Goal Zero Yeti into any wall outlet. You will know the
Goal Zero Yeti is charging when a lightning bolt icon flashes blue in the display. The Goal Zero Yeti is
fully charged when the battery display indicator reads 100. The Goal Zero Yeti should recharge from
the wall in about 5 hours.
1. The AC wall adapter comes in two pieces. Connect the two pieces by plugging the cable into
the box.
IMPORTANT NOTE: The Goal Zero Yeti Lithium can be charged from your car's 12V port
Zero 12V Car Charging Cable.
using a Goal
5